OpenBSD 3.8-stable (GENERIC_light) #1: Mon Apr 24 22:49:23 CEST 2006
    arnaud@OpenBSD1:/usr/src/sys/arch/i386/compile/GENERIC_light
cpu0: Mobile Intel(R) Celeron(TM) CPU 1200MHz ("GenuineIntel" 686-class) 1.20 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 267894784 (261616K)
avail mem = 240136192 (234508K)
using 3295 buffers containing 13496320 bytes (13180K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 08/02/02, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC off, battery charge high, estimated 3:06 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbb90/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x800! 0xcf800/0x800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
xl0 at pci2 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11, address 00:08:74:49:a3:54
OUI 0x00105a model 0x0000 rev 0 at xl0 phy 24 not configured
cbb0 at pci2 dev 1 function 0 "Texas Instruments PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 1 function 1 "Texas Instruments PCI1420 CardBus" rev 0x00: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATCS04-0>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <IOMEGA, ZIP 250, 09.K> SCSI0 0/direct removable
sd0: 239MB, 239 cyl, 64 head, 32 sec, 512 bytes/sec, 489532 sec total
sd0(pciide0:1:0): using PIO mode 0, DMA mode 1
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11, ICH3 AC97
ac97: codec id 0x4352595b (Cirrus Logic CS4205 rev 3)
ac97: codec features mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, SRS 3D
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef6d netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umodem0 at uhub0 port 1 configuration 1 interface 0
umodem0: Motorola Inc. Motorola Phone (C450), rev 1.10/0.01, addr 2, iclass 2/2
umodem0: data interface 1, has CM over data, has no break
umodem0: status change notification available
ucom0 at umodem0
umodem0: at uhub0 port 1 (addr 2) disconnected
ucom0 detached
umodem0 detached
uhci0: interrupt while not operating ignored